The 175 Electrical Safety Analyzer is a lightweight and ultra-portable analyzer for general electrical-safety inspection, designed to meet the needs of plant maintenance and biomedical engineering where patient-lead testing is not required.
To Download manual of 175 Electrical safety analyzer, click here
180 Electrical Safety Analyzer
The 180 Electrical Safety Analyzer is a lightweight and ultra-portable test device for ECG-device-leakage and isolation testing.
To download user's guide, click here.
232D Electrical Safety Analyzer
The 232D Electrical Safety Analyzer is a versatile, full-featured manual tester that combines both safety testing and ECG simulation in one portable package.
The test receptacle on the top panel simulates the standard single-fault conditions to assist technicians in assessing equipment safety. An internal GFCI protects both the operator and the equipment under test.
The 232D’s robust features simplify analysis of sophisticated equipment, such as 12-lead electrocardiographs or recorders. The device features a wide range of ECG simulations and performance testing waveforms, as well as 10 jacks for patient applied parts testing. The 232D conducts leakage current tests on all or individual patient electrodes and between specified patient electrode pairs.
To download user's guide-1, click here.
To download user's guide-2, click here.
601 Pro SeriesXL International Safety Analyzer
The 601 Pro SeriesXL is an automated electrical-safety analyzer that meets stringent international standards for electrical-safety testing of hospital and laboratory electromedical equipment. The 601 Pro SeriesXL is also available with a built-in printer.
To download user guide, click here.
ESA601 Electrical Safety Analyzer
ESA601 Electrical Safety Analyzer tests medical equipment to both US and international standards. Users simply flip a switch to change between AAMI or IEC electrical safety testing load. The US version includes overlays in AAMI or IEC nomenclature so technicians use the terms that are most familiar to them. Multiple language overlays, outlets, and power cords are available for convenient use in many countries.
Ten applied part connections allow for lead-to-ground (patient), lead-to-lead (patient auxiliary), and lead isolation (mains on applied part) leakage testing of equipment with multiple applied parts.
Designed for on-the-go testing, the portable analyzer is lightweight and compact and comes with a sturdy handle for easy carrying.
For an automated solution, Fluke Biomedical’s Ansur software plug-in for the ESA601 allows technicians to use a PC to run autosequences, document results, and print reports.
To download user's guide, click here.
ESA620 Electrical Safety Analyzer
The ESA620 Electrical Safety Analyzer represents the next generation in portable, manual electrical-safety testers for the biomedical technician and clinical engineer that are performing tests on medical equipment. With selections of three test loads, two protective earth test currents, and two insulation test voltages this versatile product can be used worldwide to test to their standard of choice: IEC60601, ANSI/AAMI ES60601, IEC62353, VDE 751, ANSI/AAMI ES1:1993, NFPA-99, AN/NZS 3551, IEC61010.
This multifaceted device performs all primary electrical safety tests, including mains voltage, protective earth resistance, insulation resistance, device current, earth, chassis, and patient leakages as well as several additional leakage tests to comply with EN62353. It comes standard with test leads for 2-wire protective earth measurements, and with optional leads offers the time-saving 4-wire technique. Additionally, the 20-A-device receptacle allows for testing of those devices that need it, so the technician is not limited to only test 15-A equipment. (US only)
New DSP technology offers better accuracy of leakage measurements throughout the ranges specified in the standards, and an intuitive interface guides the user through tests. The ESA620 features a large display to facilitate quick and clear indication of performed tests, criteria associated with test set up, device under test receptacle conditions and results.
Equipped with ten ECG posts, the ESA620 offers simulation of ECG and performance waveforms so both electrical safety and basic tests on patient monitors can be performed with a single connection. The unit is equipped with standard USB interface for computer control and data transfer. When used with optional Ansur computer-based software plug in, the ESA620 allows for standardization of test procedures, as well as result capturing, storage and printing of reports. When combined with Ansur, the ESA620 becomes automated, capturing results and comparing them to standard limits, essentially enabling this manual unit the sophisticated performance of the high end models at half the price.
To view the demo of ESA620 Analyzer, click here.
To see the video of ESA620 operation, click here.
To download the user manual,click here.
MedTester 5000C Automated Biomedical Equipment Test System
The medTester 5000C – a unique, fully automated electrical safety and biomedical performance inspection device from Fluke Biomedical – is the most versatile analyzer available on the market today for biomedical professionals and manufacturers. All the features you need from conventional manual electrical-safety analyzers are standard in the medTester 5000C and are available in a virtually unlimited number of possible configurations.
To download user guide of MedTester, click here.
QA-90 MKII Electrical Safety Analyzer
The QA-90 represents a new generation of safety testing equipment. QA-90 is the only automatic safety tester that can test Instruments containing modules with different classes of protection in one test run (i.e. CF and BF defibrillators). It is simple to use. All you need to do is select the type and class of the equipment to be tested. When you press START, the QA-90 will execute the tests prescribed in the selected standard.
The test result can either be printed out immediately or stored internally in the unit for later use. The QA-90 can be fully remotely controlled via ansur software. With ansur, you can make your own test protocols, store the information on disk and export formatted data to equipment management databases.
ULT800 Ultrasound Transducer Leakage Current Tester
The ULT800 tests the electrical safety of ultrasound transducers independent of their ultrasound machines. A variety of adapters allow for testing of many different makes and models, including transesophageal echocardiography (TEE) transducers.
With the ULT800, transducer testing easily fits into routine disinfecting procedures. Technicians conduct the tests in a cleaning basin at the beginning of the day and between patients. If a transducer is electrically safe for patient use, the green PASS lamp lights. Simple Pass/Fail indicators make it simple to use even non-technical medical personnel, such as sonographers and central sterile-supply technicians, can perform the tests
The ULT800 is available by itself or as a kit, which includes a dual-conductivity electrode and carrying case.
To download the user guide, click here.
No comments:
Post a Comment